Tag Archives: AMPAC Analytical

Blog

Phase-Appropriate Method Development 

The Cost of Drug Discovery and Development and How to Mitigate It 

The path to successful drug discovery and development is extremely long, expensive, and risky and can take between 10 to 15 years at an average cost of more than $1–2 billion for every new drug that is approved for clinical use.1,2 In fact, preclinical drug discovery alone “typically takes five and a half years and accounts for about one-third of the cost of drug development.”3,4 Therefore, even during the earliest stages of a drug product or active pharmaceutical ingredient project, phase-appropriate method development should be instituted to manage costs. This bolsters the chances for success and ensures reliable results, quality management, and reproducibility while avoiding “unreliable results (that) might not only be contested in court but could also lead to unjustified legal consequences for the defendant or to wrong treatment of the patient.”5 At its most basic, phase-appropriate method development maps the “what is needed” to “when it is needed.”6 Effective phase-appropriate method development can provide long-term product support by introducing mass spectrometry compatibility and forced degradation development to ensure your methods are stability-indicating and amenable to unknown impurity identification. By instituting a phase-appropriate method development process, combined with a quality-by-design approach around each logical sequence of events – and rigorously following it – it is more likely to create a cost-effective, successful outcome as you take the drug product through the regulatory process. 

It Can Pay to Outsource 

As the incentives for strong phase-appropriate method development increase, so too has the recognition of its value. Unfortunately, “it is not uncommon…to find pharmaceutical companies and contract research organizations (CROs) that are not taking advantage of the phase-appropriate approach and simply reference the typical ICH guidance for analytical items, such as method validation.”7 However, while FDA guidance encourages the use of a phase-appropriate approach, it is lacking in details and requirements. This leaves many companies to seek out ICH guidance as an alternative, conservative approach. Also, within their CGMP quality system, they may find it difficult to accommodate differing levels of CGMP compliance throughout the various clinical phases of development. This is when it might be an opportune moment to consider an outside expert that specializes in phase-appropriate method development processes for drug discovery and validation.  A successful yet robust phase-appropriate method development program can balance competing interests and requirements and still provide a regimen that meets the overall development goals without sacrificing any of the requirements of the program.  

AMPAC Analytical Laboratories (AAL), an SK pharmteco company, has decades of experience in providing a wide array of release testing services for raw materials, intermediates, APIs, and drug products. Our labs are equipped to handle hazardous, cytotoxic/high potency compounds as well as controlled substances for schedule II through V. Additionally, we have not only the expertise to conduct forced degradation experiments but also appropriate instrumentation like mass spectrometers to support later phases of development for your products. Please contact us to discuss how we can ensure the success of your drug discovery and development project and simultaneously reduce risks. 

References  

  1. https://www.sciencedirect.com/science/article/pii/S2211383522000521 
  2. https://www.frontiersin.org/articles/10.3389/fphar.2020.00770/full 
  3. https://www.frontiersin.org/articles/10.3389/fphar.2020.00770/full 
  4. https://www.nature.com/articles/nrd3078 
  5. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3658022/ 
  6. https://www.pharm-int.com/2020/08/27/phase-appropriate-drug-development-validation-process/ 
  7. https://www.pharmtech.com/view/designing-phase-appropriate-cmc-analytical-programs 

Resources 

 

Blog

TCB* With Your TTC Needs

Triple Quad HPLC

Triple Quad HPLC“The dose makes the poison” – Paracelsus (c. 1493– 1541), born Theophrastus von Hohenheim

The Threshold of Toxicological Concern (TTC) refers to levels of mutagenic impurities expected to pose a negligible carcinogenic risk.1 The US FDA, the EMA (European Medicines Agency), and the European Food Safety Authority (EFSA) all have TTC values and regulations in place for food and active pharmaceutical ingredients (APIs), along with numerous other products.2,3 Originally, these standards were applied to TTC levels from oral ingestion but have expanded to even include cosmetics and fragrances.4,5

One tool to assess risk is the use of Cramer classes for organic impurities. They range from I-III, indicating a low, medium, or high probability of toxicity.5

There are numerous tools and techniques to assess TTC, depending on the product (food, water, and other beverages, APIs, or cosmetics) and the mutagenic impurity. AMPAC Analytical can utilize TTC guidelines and risk assessments to establish method development and validation targets that ensure acceptable levels of mutagenic impurities in your API or food products. Contact us today to learn more about analytical strategies to control mutagenic impurities.

*Taking Care of Business

References

  1. https://www.fda.gov/media/85885/download
  2. https://www.ema.europa.eu/en/ich-m7-assessment-control-dna-reactive-mutagenic-impurities-pharmaceuticals-limit-potential
  3. https://www.efsa.europa.eu/en/topics/topic/threshold-toxicological-concern
  4. https://www.sciencedirect.com/science/article/abs/pii/S0278691507002207
  5. https://www.sciencedirect.com/science/article/abs/pii/S0273230015300660

Resources

  • https://www.fda.gov/media/85885/download
  • https://www.frontiersin.org/articles/10.3389/ftox.2021.655951/full
  • https://academic.oup.com/toxsci/article/86/2/226/1653574
  • https://www.sciencedirect.com/science/article/abs/pii/S027869159600049X
Blog

Forced Degradation Studies Can Reduce Stress(ors)

Forced Degradation is an important addendum to our previous post on Stability and Storage. Stressors are applied to new APIs and drug products to determine their degradation pathways and products under a variety of environmental conditions, including acid, base, light, heat, and oxidation. Forced degradation studies are also known as stress testing, stress studies, stress decomposition studies, and forced decomposition studies. These conditions “…are more severe than accelerated (stability) conditions and thus generate degradation products that can be studied to determine the stability of the molecule.”1  

Regulatory requirements for forced degradation were enacted by the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH) in 1993.2   However, these guidelines “are very general in (the) conduct of forced degradation and do not provide details about the practical approach towards stress testing. Although forced degradation studies are a regulatory requirement and scientific necessity during drug development, it is not considered as a requirement for (a) formal stability program.”1 However, stability studies have become a requisite for new drug moieties. In the absence of specific guidelines, the amount of stress needs to be representational: “Overstressing a molecule can lead to degradation profiles that are not representative of real storage conditions and perhaps not relevant to method development. Therefore, stress-testing conditions should be realistic and not excessive.”3 

AMPAC Analytical (AAL), an SK pharmteco company, can assist with forced degradation studies for products at all phases of development, in tandem with stability, storage, and method development, to ensure the viability of the drug products as they were designed. We introduce forced degradation studies early in method development to ensure your product quality throughout the development lifecycle. Contact AAL today to learn more.  

References 

  1. https://www.sciencedirect.com/science/article/pii/S2095177913001007 
  2. http://www.columbiapharma.com/reg_updates/international/ich/q1a.pdf 
  3. https://www.researchgate.net/profile/Dan-Reynolds-3/publication/279607256_Available_Guidance_and_Best_Practices_for_Conducting_Forced_Degradation_Studies/links/5afd6a2ca6fdcc3a5a44c50f/Available-Guidance-and-Best-Practices-for-Conducting-Forced-Degradation-Studies.pdf 

Learn more: https://ampacanalytical.com/laboratory-services/stability-program/ 

Blog

The Background, Advantages of, and Considerations for Radiolabeled Peptides

Integrin αvβ3 and RGD Binding

Integrin αvβ3 and RGD Binding

The Background, Advantages of, and Considerations for Radiolabeled Peptides
The use of radiolabeled peptides is a well-established tool in researching and treating many diseases and conditions. Selective receptor-targeting peptides are utilized as agents due to their rapid circulatory and tissue clearance and the high affinity and specificity to their targets. Peptides also have a relatively small size and low molecular weight compared to proteins and antibodies. There have been innovations and improvements in the design of peptides that incorporate chemical modifications with “impressive diagnostic accuracy and sensitivity.”1 Coupling these peptides with radiolabeling for peptide receptor radionuclide imaging (PRRI) and therapy (PRRT) has yielded remarkable results. In fact, a historical summary of radiolabeled peptides asserts, “The emergence of radiolabeled peptides for use with PET/CT such as 68Ga, 18F, and 64Cu, and the use of new receptor binding ligands…, have revolutionized PRRI and improved its diagnostic power beyond expectation.”2  

“Criteria for a successful peptide tracer,” to be utilized for PRRI, “are a high target specificity, a high binding affinity, long metabolic stability, and a high target-to-background ratio.”3 

Oncology and Radiolabeled Peptides
Oncology has benefited from the “tumor-philic” properties of Arg-Gly-Asp (RGD) peptides “because of their high affinity and selectivity for integrin αvβ3 – one of the most extensively examined targets of angiogenesis. Since the level of integrin αvβ3 expression has been established as a surrogate marker of angiogenic activity, imaging αvβ3 expression can potentially be used as an early indicator of the effectiveness of antiangiogenic therapy at the molecular level.”4 In addition to integrin αvβ3 expression, “tumor angiogenesis…has been well recognized as an essential hallmark for tumor growth, invasion, and metastasis.”4 All this has made RGD-containing peptides “promising molecular agents for imaging angiogenesis.”5  

Beyond Oncology
Since integrins are “involved in adhesion between cells and the extracellular matrix” and, as such, are associated with normal and pathological states, this family of receptors is useful for targeting a range of diseases.6 Current applications include “cardiovascular imaging, atherosclerosis imaging, remodeling after myocardial infarct or stroke, imaging of myocardial ischemia, identification of abdominal aortic aneurysm, imaging of chronic inflammation, pulmonary inflammation, assistance with bone marrow evaluations, and tissue engineering.”6  

A Brief History of RGD Peptides and Radiolabeling
Although radiopharmaceutical therapies, which can concurrently detect and treat tumors (i.e., theranostics, a portmanteau of therapeutics and diagnostics), have been around for eighty years, it was not until the combination of these payloads was combined with peptides that the potential for better targeting became a reality. The use of the RGD peptide sequence to attach to cells was first reported by M.D. Pierschbacher and E. Ruoslahti in Nature, nearly forty years ago in 1984, as a feature of fibronectin.5,7 Next, targeting tumors with radioactive peptides began, initiated by OctreoScan’s breakthrough in the early 1990s, wherein somatostatin receptor subtype 2 (SST-2) positive tumors were identified.8,9 After that, the first monomeric integrin-specific PET tracer used in patients was F-Galacto-RGD, a glycosylated RGD-peptide.5,10 Since then, the tripeptide R-G-D sequence has generally been utilized as a tracer, carrying the isotope to integrins that are expressed on both tumor cells and activated endothelial cells of tumor neo-vasculature. In the ensuing years, advancements have continued apace, and going forward, the intersection of PRRI/PRRT from radiolabeled peptides combined with AI, precision, and personalized medicine assures transformative innovations. 

Obstacles and Numerous Options for Radiolabeled Peptide Production
Because of their established safety, development, and design history, and “the fact that there are many RGD-based tracers with known pharmacokinetics, it can be useful to use them in the imaging of diseases that currently have no accurate method of diagnosis available.”6 However, there are barriers to synthesizing radiolabeled peptides: it can be a time-consuming, complex, multi-step process. It is also highly variable based on the peptide. Other drawbacks include the intricacies of radiolabeling and the lack of automation for some of these protocols.  

Fortuitously, RGDs radiopeptides are not the only ones exhibiting exciting potential for diagnostic imaging and targeted radionuclide therapies. An extensive review article from Paweł Kręcis et al. that appeared in Bioconjugate Chemistry is recommended, as it presents some developments and perspectives in both aforementioned areas regarding the research on somatostatin, bombesin, vasoactive intestinal peptide, gastrin, neurotensin, and exendin peptide analogs, among others.11 It includes the application of radiolabeled peptides and antibodies and an analysis of clinical trials reported in 2008-2018. 

Finally, just a few of the current companies doing interesting things in radiopharmaceuticals include Aktis Oncology, Mariana Oncology, Point Biopharma, and Rayze Bio. AMPAC Fine Chemical and AMPAC Analytical, both SK pharmteco companies, have been at the vanguard of small molecule and analytical developments utilizing innovative technologies and techniques directed by teams with decades of experience. If you have a radiolabeled peptide targeted for development, our teams can design, validate, optimize, and analyze your project, ranging from research to commercial quantities.  Contact us today for more information.     

References 

  1. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5235994/ 
  2. https://link.springer.com/article/10.1007/s00259-012-2064-5 
  3. https://link.springer.com/article/10.1007/s00259-011-2038-z 
  4. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4679356/ 
  5. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC8924613/ 
  6. https://link.springer.com/article/10.1007/s00259-020-04975-9 
  7. https://pubmed.ncbi.nlm.nih.gov/6325925/ 
  8. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6789871/ 
  9. https://www.cancer.gov/news-events/cancer-currents-blog/2018/lutathera-fda-gastrointestinal-nets 
  10. https://pubs.acs.org/doi/10.1021/ja9603721 
  11. https://pubs.acs.org/doi/full/10.1021/acs.bioconjchem.0c00617 

Related Articles and Resources  

Blog

Raw Materials Testing: Trust – and Verify – Your Sources

The CGMP guidance for APIs from the FDA states that raw material specifications should be established and documented. The guide’s key line states, “Quality measures should include a system for testing raw materials, packaging materials, intermediates, and APIs. (19.23)”1 

Medical products, pharmacology, dietary supplements

All raw materials used in producing APIs for clinical trials must be evaluated by testing or received from the supplier with accompanying analysis and subsequently subjected to identity testing. Raw materials and intermediates need to be designated by names and/or specific codes so that any special quality characteristics can be readily identified. Furthermore, written procedures should provide for the identification, documentation, appropriate review, and approval of any changes to raw materials. Additionally, changes to supply sources of critical raw materials should be treated according to the FDA’s established change control guidelines.  

A Range of Tests for Raw Materials Are Available
Some of the categories and tests that can be utilized for raw materials testing include: 

  • Determination of Physical Properties (appearance/description, density, refractive index, pH, water content by Karl Fischer titration (coulometric and volumetric), the color and clarity of the solution, conductivity, optical rotation, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), osmolality, particle counting, particle size distribution (wet and dry), total organic carbon (TOC), and various compendial tests) 
  • Identification (appearance/description, infrared spectroscopy – ATR, salt pellets, and salt plates (for liquids), nuclear magnetic resonance (NMR), liquid chromatography – HPLC and UHPLC, gas chromatography (GC), ion chromatography (IC), mass spectrometry (MS), ultraviolet spectroscopy (UV), X-ray powder diffraction (XRPD), residue on ignition/sulfated ash, ICP-MS and ICP-OES for elemental impurities, and various compendial tests) 
  • Assay and Impurity Testing (standard titration methods, liquid chromatography (both HPLC and UHPLC) detection systems including UV, MS, RI, and CAD (charged aerosol detection), residual solvents testing utilizing gas chromatography systems equipped with FID flame-ionization detection), ECD (electron capture detection), TCD (thermal conductivity detection) and MS, ICP-OES, ICP-MS, and a variety of pharmacopeia methods such as residue on ignition/sulfated ash, heavy metals, etc.) 
  • Pharmacopeia Testing (the ability to qualify and implement monographs and testing chapters from the various pharmacopeias and their standards, including USP (United States Pharmacopoeia), EP (European Pharmacopoeia), BP (British Pharmacopoeia), JP (Japanese Pharmacopoeia), FCC (Food Chemical Codex), and ACS (American Chemical Society, Reagent Standards)) 

Trust – and Verify – Your Raw Materials Testing Solution
The range of testing requirements, procedures, and record-keeping can be daunting. It is crucial to have an experienced, reputable, and thorough laboratory available to ensure that each raw material is released in accordance with regulations. It is also important that the partner you choose to perform these tasks does so in a timely manner, communicating every step of the way. AMPAC Analytical has decades of experience along with the resources to provide all the analytical solutions listed above, combined with a responsive customer service attitude, and a demonstrated history of regulatory audit compliance. We urge that you contact AMPAC Analytical today to learn more about you can trust and verify all your raw materials. 

 References 

  1. https://www.fda.gov/regulatory-information/search-fda-guidance-documents/guidance-industry-q7a-good-manufacturing-practice-guidance-active-pharmaceutical-ingredients#P309_13037 

 

Blog

Extractables and Leachables

blank pharmaceutical and drug packaging

Extractables and Leachables (E&L) are essential areas of concern for the pharmaceutical and food industries, specifically regarding their packaging, usage components (e.g., medical devices or syringes), and the manufacturing chain. We will examine testing of analysis of them within pharmaceutical applications. The two terms are related but distinct, each with its own analytical requirements.   

Definitions of Extractables and Leachables 

A handy article published in Pharmaceutical Engineering by the International Society for Pharmaceutical Engineering (ISPE) explains that “Extractables are chemical compounds that migrate from single-use systems (SUS) into model solvent solutions under controlled and exaggerated conditions depending on temperature, pH, polarity, and time.” In other words, this happens when using strong solvents. They note that “SUS are normally not exposed to such conditions in biopharmaceutical processes.”1  

ISPE’s article defines leachables as “chemical compounds that migrate from SUS into process solutions under normal biopharmaceutical process conditions. They further clarify that these compounds “may end up in the final drug product formulation. For the most part, leachables are a subset of extractables, although interaction with product components may produce leachables not seen as extractables.”1 

Guidance on Extractables and Leachables 

The FDA has released a series of guidelines for the pharmaceutical industry, including Container Closure Systems for Packaging Human Drugs and Biologics, that provide guidance for submission in support of an original application for any drug product. It also covers a wide range of forms and delivery systems of drugs:

  • Inhaled 
  • Injected 
  • Liquid-based  
  • Oral  
  • Solid oral dosage forms  
  • Ophthalmic 
  • Topical and topical delivery systems  
  • Powders for reconstitution   
  • And other dosage forms 

Additionally, the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use (ICH) also has issued the ICH Q3E: Guideline for Extractables and Leachables.2,3 These are both useful in providing direction for E&L concerns and control strategies. 

Plan Against Extractables and Leachables 

To guarantee adherence to all guidelines and regulations while ensuring patient safety, it is crucial to know and utilize materials compatible with your product. To accomplish this, solvent use, packaging, and delivery systems must all be tested and analyzed in cGMP and FDA-compliant laboratories.  This should include the following:

  • A thorough review of all materials used in packaging and production, production, and equipment to predict the compatibility of your packaging system with your product. AAL can provide reports for items from each step. 
  • Extraction studies on the materials used. 
  • Leachable studies to identify any impurity resulting from those materials found in the final product under normal usage conditions. 
  • If impurities are detected, AAL can provide toxicological evaluations, including profiles of the impurities and the risks they pose for the patients, establish safety limits, or adjust for different forms of medication application. 
  • We can assess risks created by various exposure levels due to the impurity in the finished product. 
  • Finally, AAL provides a detailed report of our findings in accordance with the applicable governing bodies (e.g., FDA, EMA, PQRI, PDA). 

 AMPAC Analytical can review your analysis and testing needs for extractables and leachables for any forms and delivery systems listed in the table above, complying with the strictest standards necessary. 

References 

  1. https://ispe.org/pharmaceutical-engineering/may-june-2017/extractables-leachables-not-same 
  2. https://www.fda.gov/media/70788/download 
  3. https://database.ich.org/sites/default/files/ICH_Q3E_ConceptPaper_2020_0710.pdf 

Resources  

 

Blog

Nitrosamines in Food and Beverages

This is the third in a series of entries examining nitrosamines in a range of products. Our first of two previous articles presented an overview of nitrosamines, including a historical look at their implication as a probable carcinogen. In the second entry, we reviewed their presence in active pharmaceutical ingredients (APIs), and how to remove them. 

Nitrosamines are organic compounds found in the human diet and other environmental sources. These highly potent carcinogens can cause tumors in nearly all organs and have been classified as genotoxic impurities (GTI).  

Background on Nitrosamines in Food and Beverages
The possible linkage between cancer and the large class of chemical compounds known as nitrosamines was first postulated by William Lijinsky in 1970.1 Since then, they have been detected above recommended intake limits in numerous foods and beverages, both naturally occurring and through additives in processed foods.  Nitrosamines have been found in a wide variety of different foods ranging from cheeses, soybean oil, canned fruit, meat products, cured or smoked meats, fish and fish products, spices used for meat curing, beer, and other alcoholic beverages.2,3 Beer, meat products, and fish are considered the main sources of exposure. “Drying, kilning, salting, smoking, or curing promotes the formation of nitrosamines.2,4 

 Nitrites and nitrates may occur naturally in water or foods such as leafy vegetables due to the use of fertilizer or may be added to foods to prevent (the) growth of Clostridium botulinum, or to add color or flavor.”2,5 

The nitrosamines most frequently found in food are N-nitrosodimethylamine (NDMA), N-nitrosopyrrolidine (NPYR), N-nitrosopiperidine (NPIP), and N-nitrosothiazolidine (NTHZ).2,3 NDMA, NPYR, and NPIP are reasonably anticipated to be human carcinogens based on evidence of carcinogenicity in animal experiments.2,6,7 Evidence from case-control studies supports an association between nitrosamine intake with gastric cancer, but not esophageal cancer in humans.2,8 

Determining Acceptable Levels of Nitrosamine
Levels of nitrosamines have been declining during the past three decades, concurrent with a lowering of the nitrite use in food, use of inhibitors such as ascorbic acid, and application of lower operating temperatures and indirect heating during food processing.2,4 

A triple quadrupole MS

The FDA provides “action levels” for poisonous or deleterious substances found in human food and animal feed. These action levels and tolerances represent limits at or above which FDA will take legal action to remove products from the market.9 Current FDA regulations do not limit nitrosamine levels in foods, but they have established an action level of 10 ppb for individual nitrosamines in both consumer and hospital rubber baby bottle nipples. They have also limited the approval of nitrites in curing mixes to the FDA-regulated food additive process (21 CFR 170.60), and the approval of sodium nitrite as a food additive (food preservative) (21 CFR 172.175). The USDA monitors finished meat products to ensure that nitrite is not present in amounts exceeding 200 ppm (9 CFR 424.21).2 

As investigators summarized in a study published in the World Journal of Gastroenterology, “there is a positive association between nitrite and nitrosamine intake” and gastric cancer, “between meat and processed meat intake and” gastric cancer and esophageal cancer, “and between preserved fish, vegetable, and smoked food intake and” gastric cancer, “but is not conclusive.”8 While there is not an irrefutable link between nitrite and nitrosamine intake to cancer when combined with action-level requirements and guidance from the FDA, the directive for food and beverage producers is certainly clear. 

Final Thoughts 

Nitrosamines are an inevitable chemical outcome in the manufacturing and processing of many foods, beverages, medicines, and numerous other products. Due to their low concentrations, they are also challenging to detect. Fortunately, rigorous testing services are available to screen and remove them from exposure by the end user. AMPAC Analytical has the specialized expertise, equipment, and methodologies to detect these impurities by gas chromatography or high-performance liquid chromatography coupled with mass spectrometry. Please contact us with any specific questions or to receive a quote for nitrosamines. 

References
 Items marked with an asterisk are open access.  

  1. https://doi.org/10.1038/225021a0 
  2. * https://doi.org/10.3390/toxins2092289 
  3. https://ntp.niehs.nih.gov/whatwestudy/assessments/cancer/roc/index.html 
  4. https://onlinelibrary.wiley.com/doi/book/10.1002/9780470430101#page=369 
  5. https://onlinelibrary.wiley.com/doi/book/10.1002/9780470430101#page=566 
  6. * http://ntp.niehs.nih.gov/ntp/roc/eleventh/profiles/s137nsop.pdf
  7.  http://ntp.niehs.nih.gov/ntp/roc/eleventh/profiles/s136nsop.pdf
  8. * https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4087738/ 
  9. * https://www.fda.gov/regulatory-information/search-fda-guidance-documents/guidance-industry-action-levels-poisonous-or-deleterious-substances-human-food-and-animal-feed 

Resources & Further Reading 

AMPAC 

General Information on Nitrosamines 

Nitrosamine and the Diet 

Blog

Nitrosamines in Active Pharmaceutical Ingredients 

This is the second in a series of entries examining nitrosamines in a range of products. Our first article presented an overview of nitrosamines, including a historical look at their implication as probable carcinogens. This entry will review their presence in active pharmaceutical ingredients (APIs) and process mitigation strategies.  

Nitrosamines are organic compounds found in medications, the human diet, and the environment These carcinogens can cause tumors in nearly all organs and have been classified as possible genotoxic impurities (GTI).   

Background on Nitrosamines in Active Pharmaceutical Ingredients 
The linkage between cancer and a large class of chemical compounds known as nitrosamines was postulated by William Lijinsky in 1970.1 Then, in June 2018, their presence (specifically, N-nitroso-dimethylamine (NDMA)) was detected in the API Valsartan, an Angiotensin-II-receptor antagonist.  

NDMA

It later became “obvious that the issue may not only occur with sartans but, in principle, with any API containing a vulnerable amine and a nitrosation source. Hence not only NDMA but a plethora of potential nitrosamines could be created.”2 They have been subsequently detected in other medicines resulting in 250 product recalls, affecting more than 1400 lots.3,4 The cost of recalls could be high.5 APIs or their impurities can become nitrosated “during the later stages of the synthetic process of the drug product manufacturing or even while in the completed, packaged product.”6 As discussed in our previous entry, primary amines are not a concern, as they have limited stability.6 However, secondary and tertiary amines, along with quaternary ammonium compounds, are considered potential nitrosamine precursors, according to the current guidelines of the FDA and EMA.6,7  As a useful reference for amine components, there is a central system for the ingredients in medicinal products known as the Global Substance Registration System (GSRS https://gsrs.ncats.nih.gov/.)8   Some of the possible causes for the presence of nitrosamines are:  

  • The use of sodium nitrite (NaNO2), or other nitrosating agents. 
  • The use of raw materials and intermediates contaminated by nitrosamines 
  • Degradation processes of starting materials, intermediates, and drug substances during formulation or storage 
  • The use of certain contaminated packaging materials 

Detection Tools 

Fortunately, there are many tools to detect nitrosamines. NDMA, NDEA, and other nitrosamine impurities can be detected at ppb level using gas chromatography, such as with a QTOF (Quadrupole Time of Flight Mass Spectrometer) or triple quadrupole.  

 Ways to Mitigate Nitrosamine Formation 

There are numerous ways that nitrosamines can be mitigated through API process design. For example, the FDA’s Control of Nitrosamine Impurities in Human Drugs Guidance for Industry, issued by the Center for Drug Evaluation and Research, states that:  “The following factors should be considered during process development:  

  • Avoiding reaction conditions that may produce nitrosamines whenever possible; when not possible, demonstrating that the process is adequately controlled and is capable of consistently reducing nitrosamine impurities through appropriate and robust fate and purge studies.  
  •  Using bases other than secondary, tertiary, or quaternary amines (when possible) if ROS (Route of Synthesis) conditions may form nitrosamines 
  • Using caution when the ROS involves the use of amide solvents (e.g., N,N-dimethylformamide, N,N-dimethylacetamide, and N-methylpyrrolidone) 
  • Replacing nitrites with other quenching agents for azide decomposition processes.  
  • Optimizing and consistently controlling the sequences of reactions, processes, and reaction conditions (such as pH, temperature, and reaction time) 
  • Designing a manufacturing process that facilitates the purge of nitrosamine impurities in the subsequent processing steps. 
  • Auditing API supply chains accompanied by continuous monitoring for any at-risk raw materials, starting materials and intermediates, and avoiding cross-contamination when using recovered materials such as solvents, reagents, and catalysts in the manufacturing process.  
  • Recovered material should be used only in the same step or in an earlier step. API manufacturers should be aware that potable water used in API manufacture may contain low levels of nitrite and even nitrosamines from environmental contamination”.9,10 

 Solutions 

Nitrosamines are an inevitable chemical outcome in the manufacturing and processing of many items, including APIs. Due to their low concentrations, they are also challenging to detect. AMPAC Analytical has rigorous testing services available to screen to trace levels in challenging sample matrices, including process intermediates, drug substances, and drug products. We have the specialized expertise, equipment, and methodologies to detect these impurities by gas chromatography or high-performance liquid chromatography coupled with mass spectrometry. Please contact us with any specific questions or to receive a quote for nitrosamines screening.  

References  

  1. https://doi.org/10.1038/225021a0   
  2. https://jpharmsci.org/article/S0022-3549(23)00018-7/fulltext  
  3. https://doi.org/10.1021/acs.jmedchem.0c02120  
  4. https://doi.org/10.1016/j.xphs.2022.11.013 
  5. https://www.bloomberg.com/news/articles/2022-09-01/drug-recalls-for-nitrosamines-could-cost-big-pharma-millions  
  6. https://www.fda.gov/media/141720/download 
  7. https://www.ema.europa.eu/en/documents/referral/nitrosamines-emea-h-a53-1490-assessment-report_en.pdf https://doi.org/10.1093/nar/gkaa962  
  8. https://doi.org/10.1093/nar/gkaa962   
  9. https://ampacanalytical.com/wp-content/uploads/2023/01/Control-of-Nitrosamine-Impurities-in-Human-Drugs-Guidance-for-Industry.pdf  
  10. https://www.who.int/water_sanitation_health/water-quality/guidelines/en/ 

Resources & Further Reading  

AMPAC  

General Information on Nitrosamines  

Nitrosamine and Pharmaceuticals  

Blog

Nitrosamines: An Overview

This is the first in a series of entries examining nitrosamines in a range of products.  

 Nitrosamines are organic compounds found in the human diet and other environmental outlets. Being potent carcinogens that can cause tumors in nearly all organs, they have been classified as genotoxic impurities (GTIs). There are guidelines and rulings by various regulatory organizations, including the FDA, EPA, EMA, and the IARC (International Agency for Research on Cancer). Their presence and attendant concerns have been noted for many years. A.J. Gushgari and R.U. Halden wrote in Chemosphere,  Nitrosamines were first proposed as “environmental carcinogens by William Lijinsky in 1970, which fostered research on N-nitrosamine occurrences in environmental media.”1 These included “ambient water, aquatic sediments, and municipal sewage sludge (Schreiber and Mitch, 2006; Venkatesan et al., 2014; Zeng and Mitch, 2015; Gushgari et al., 2017).”1 Concern about their presence has significantly expanded to include food and active pharmaceutical ingredients (APIs). Our next two blog entries will explore the effects and mitigation of nitrosamines in these two areas. 

Background on Nitrosamines
Basically, “Nitrosamines are formed from the reaction of nitrite with primary, secondary, or tertiary amines in an acidic medium.”2 Primary and tertiary amines are typically not concerns for nitrosamines, but should be part of the chemical evaluation as there are cases where they can be impacted to form these impurities. 

 Since nitrates and the conditions are common in a wide range of products, vigilance is warranted. The reaction between nitrous acid and primary aromatic amines was first observed and reported in 1864 by Peter Griess. The work of Baeyer and Caro, and Otto Witt in the 1870s further researched the reaction. As Gushgari and Halden state, it was Witt in his 1878 publication that the term “nitrosamine” was first introduced to describe ““any substituted ammonia which contains, instead of at least one atom of hydrogen, the univalent nitrosyl group, NO, in immediate connection with the ammoniacal nitrogen”.”1 Almost one hundred years later, the aforementioned William Lijinsky, studying the environmental causes of cancer and specifically chemical carcinogens, began his decades-long examination of nitrosamines, eventually leading him to appear before multiple congressional committees and to work with the FDA. As a result, the FDA issued numerous guidelines in the following decades, with many released in the last few years. The FDA’s guideline of a current acceptable intake limit is 26.5 ng/day for APIs. For drinking water, it is 7 ng/L. Along with many other resources, they published Control of Nitrosamine Impurities in Human Drugs (PDF) for “immediate implementation” on September 1, 2020.  The European Medicines Agency (EMA) has also been active in this area, with many resources found here.  

 Many Types and an Increasing Concern 
Of course, there is more than one type of nitrosamine to contend with since there are countless combinations of the structural elements available. Sebastian Schmidtsdorff et al. listed a table (Figure 1) of sixteen investigated nitrosamines with their attendant CAS numbers, abbreviations, and interim limits (IL).4 These were discovered during their research using 249 different, randomly selected samples of APIs from 66 manufacturers.   

Figure 1
(N/A = not applicable/interim limits not published yet). 

Name  Abbreviation  CAS-No.  IL Interim Limits (ng/day) 
N-Nitrosodimethylamine  NDMA  62-75-9  96 
N-Nitrosomethylethylamine  NMEA  10595-95-6  NA 
N-Nitrosodiethylamine  NDEA  55-18-5  26.5 
N-Nitrosodiethanolamine  NDELA  1116-54-7  NA 
N-Nitrosoethylisopropylamine  NEiPA  16339-04-1  26.5 
N-Nitrosodiisopropylamine  NDiPA  601-77-4  26.5 
N-Nitrosodi-n-propylamine  NDPA  621-64-7  26.5 
N-Nitrosodi-n-butylamine  NDBA  924-16-3  26.5 
N-Methyl-N-nitrosoaniline (N-nitrosomethylphenylamine)  NMPhA  614-00-6  34.3 
N-Nitrosomethyl(2-phenylethyl)amine  NMEPhA  13256-11-6  8 
N-Nitrosodiphenylamine  NDPhA  86-30-6  NA 
N-Nitrosopyrrolidine  NPyr  930-55-2  NA 
N-Nitrosopiperidine  NPip  100-75-4  1300 
N-Nitrosomorpholine  NMor  59-89-2  127 
1-Methyl-4-nitrosopiperazine  MNPaz  16339-07-4  26.5 
N-Nitroso-N-methyl-4-aminobutyric acid  NMBA  61445-55-4  96 

 The most commonly occurring nitrosamines in APIs are NDMA, NDEA, NMBA, NDPA, NEIPA, NDBA, and NMPA. In addition to the number of nitrosamines, the products where they have been detected have increased dramatically. For example, since the discovery of their presence in an API, Valsartan (an Angiotensin-II-receptor antagonist) in 2018, they have been detected in other medicines resulting in 250 product recalls, affecting more than 1400 lots.5,6 In addition to the financial impact of these recalls costly litigation has risen too. 

 A Positive Note
Interestingly, although nitrosamine impurities in products are an ever-present concern, at least one medication, Carmustine [154-93-8] (Figure 2), is an antineoplastic nitrosourea [13010-20-3] and is used in treating several forms of cancer.7,8 

Figure 2 

carmustine structure

Final Thoughts
Nitrosamines can form during the manufacturing and processing of foods, beverages, medicines, and numerous other products.  In addition, they can form upon storage.5 Despite detection challenges, rigorous testing and mitigation services are available to screen and avoid their formation, thereby protecting consumers. In fact, AMPAC Analytical (AAL) has the specialized expertise, equipment, and implemented stringent methodologies to detect these impurities, utilizing gas chromatography or high-performance liquid chromatography coupled with tandem or high-resolution mass spectrometry. AAL currently maintains three validated procedures for general nitrosamines screening. Please feel free to contact us with any specific questions or to receive a quote for nitrosamine screening in your product. 

 Items marked with an asterisk are open access or available without registering. 

References  

  1. * https://doi.org/10.1016/j.chemosphere.2018.07.098 
  2. https://pubmed.ncbi.nlm.nih.gov/2184959/ 
  3. * https://doi.org/10.1016/j.xphs.2022.11.013 
  4. * https://doi.org/10.1002/ardp.202200484 
  5. https://doi.org/10.1021/acs.jmedchem.0c02120 
  6. https://www.bloomberg.com/news/articles/2022-09-01/drug-recalls-for-nitrosamines-could-cost-big-pharma-millions 
  7. * https://pubchem.ncbi.nlm.nih.gov/compound/Carmustine 
  8. * https://medlineplus.gov/druginfo/meds/a682060.html 

Resources & Further Reading 

AMPAC 

General Information on Nitrosamines 

Nitrosamine Exposure and Environmental Concerns 

Nitrosamine and Pharmaceuticals 

Nitrosamine and the Diet